How To Turn On Keyboard Backlight In Windows 10?

The majority of the new laptops in the market now have backlight keyboard designs for getting the work done more smoothly. They have keyboard backlight illumination as well as glowing letters. Unfortunately, you might not be able to use this feature some times. However, the issue is not with your keyboard.

For the Windows 10 users, it can be possible that the backlit keyboard feature is disabled from the Settings application. It can be enabled by only going to the Settings and adjusting it.

Go through the given below points carefully for knowing the methods of managing the backlit keyboard in your Windows 10 device.

• The method of going for the Windows Mobility Center

Follow the given below instructions precisely.

1. Firstly, press the Start option.
2. Then, you need to write the ‘Control Panel’ in the search box.
3. After that, as soon as the Control Panel window gets displayed, you need to search for the ‘Windows mobility center’ tab.
4. Next, open the Windows Mobility Center.
5. Then, push the toggle rightwards, which is located under the ‘Keyboard backlight’ tab for turning on the backlight.
6. After that, press the tab.
7. Next, turn on the ‘Keyboard lighting.’
8. Then, select the brightness level according to your suitability.
9. After that, select the time for keyboards backlight’s auto shutdown.
10. Note that you shall be getting several options to choose from: One is you can choose options between five seconds and 15 minutes and the other is ‘Never Off’ if you do not wish to have the backlight disabled all by itself if the laptop is inactive.
11. Lastly, choose ‘OK’ as soon as you are done with the modifications.

Resolving Issues

There are some of the Windows 10 device users who keep complaining that the keyboard backlight feature stop working. If you are among them, then there is nothing to worry about it. Look at the given below instructions one by one and surely find the solution for the same.

1. Firstly, view the Start menu.
2. Then, write ‘Troubleshooting’ in the search box.
3. After that, choose ‘View all.’ It shall be located on the left pane.
4. Next, choose ‘Keyboard’ from the given options.
5. Then, press on ‘Next.’
6. The device shall then look for the problems associated with the laptop’s keyboard. Note that the keyboard backlight option shall get displayed on the screen. You need to go through the on-screen instructions for turning it on.

Congratulations! You have been able to turn on keyboard backlight on Windows 10 with the help of this blog.

Eva Winget, an employee currently living in USA and working at a top printer service provider company in the day, and a technical writer at night. I am passionate about writing troubleshooting tips, beginner’s guides, news and other articles on varied topics like Brother printer support, Dell Printer Support, Kyocera Printer Support etc.

Source: Keyboard Backlight In Windows 10

HOW TO SHOW INTERNET SPEED ON TASKBAR OR SYSTEM TRAY IN WINDOWS.

Want to see the real-time internet upload and download speed in the taskbar of your computer? If yes, then you are on the right spot. If your computer is getting poor internet speed, then you may want to see the connection speed of your internet. If a website is taking too much time to load, it doesn’t mean that your connection is providing the worst speed.

Sometimes there can be many reasons for such an issue. But it is good to know the exact amount of speed your connection can offer. To know that you should have a tool installed on your device, which will show you the current internet speed. There are several tools and third-party programs that offer this feature at no cost. NetSpeedMonitor is arguably one of the best and popular tools for Windows to track and see the live internet speed.

How to Track and Display Internet Speed Using NetSpeedMonitor? 

Step 1: Installation of NetSpeedMonitor

1. Download the NetSpeedMonitor tool from the internet.
2. Now install it using on-screen instructions. If the setup fails to install the application, then you will need to start the installation in Compatibility mode. To do this, right-click on the installer file and then choose the properties option.
3. Go to the Compatibility option from the upper menu.
4. Now tick the box located in front of the “Run this program in compatibility mode for” option.
5. Now click on the drop-down menu located beneath it and then choose the “Previous version of Windows” option.
6. Hit the Apply button followed by the OK button.
7. Try to run the installer file once again.
8. Now follow the instructions on your screen and complete the installation.

You should be successful after activating the Compatibility mode.

Step 2: Getting Started and Setting Up the NetSpeedMonitor

In the system preferences, the tool will show you internet speed in Kilobits per second. You should change the internet speed metrics or unit to megabits per second because that would be more easy to understand. Most of the internet providers also use the MB/s speed unit while promoting and advertising their products and services.

To change the speed metrics, do a right-click over speed display icon on the taskbar. Now choose the Configuration option and press the drop-down menu saying “Bitrate.” After that, choose the “Mbit/s” unit and press the Apply button.

In the Configuration option, you can also tweak other settings like fonts, size of characters, and the toolbar adjustments.

Wrapping It Up

The tool is extremely straightforward, and you will get everything that you want from a net speed displaying tool. Moreover, the program requires minimal space in your PC’s storage. This tool also doesn’t slow down your processor or device.

For more info, please visit: https://evablog782539272.wordpress.com/2019/10/14/how-to-show-internet-speed-on-taskbar-or-system-tray-in-windows/